The new Yamaha P7000S Power Amplifier delivers a robust amount of professional quality power and is designed to suit almost every need. In mono bridged mode, the P7000S delivers 3200 watts of clean, dependable power.

Those on a budget will find the newYamaha P7000S has more than enough power output and doesn't put a strain on even the most modest budget. Further savings are realized with extremely efficient operation using Yamaha's exclusive EEEngine technology which keeps operational costs down by significantly reducing AC power consumption and heat generation.

Look at the specifications and you'll notice that the P7000S is light in weight, which makes transport and setup less strenuous. What's even more amazing is the comparison in weight per watt delivered by the P7000S. The use of a switching power supply makes the P7000S very lightweight while maintaining superior audio quality.

The new Yamaha P7000S has an industrial design that delivers a refined and impressive look with deep blue faceplates bordered in silver trim, handles, and mounts. The chassis is specially designed to provide added durability and strength. Continuously variable-speed fans mounted internally on either side of the front panel offer quiet, efficient cooling.

Comprehensive protection consists of power on/off muting, DC detection, thermal protection, current limiting, and a protective cover for the attenuators is also supplied. If you need a dependable, professional amp that will work day after day, and night after night, you need the new Yamaha P7000S.

Model			P7000S
Output Power
1kHz,  THD+N=1%		8Ω/STEREO	750W+750W
1kHz,  THD+N=1%		4Ω/STEREO	1100W+1100W
1kHz,  THD+N=1%		8Ω/BRIDGE	2000W
20-20kHz,  THD+N=0.1%		8Ω/STEREO	700W+700W
20-20kHz, THD+N=0.1%		4Ω/STEREO	950W+950W
20-20kHz,  THD+N=0.1%		8Ω/BRIDGE	1900W
1KHz,  20mS nonclip		2Ω/STEREO	1600W+1600W
1KHz,  20mS nonclip		4Ω/BRIDGE	3200W
Power Bandwidth		halfpower	10Hz-40kHz (THD+N=0.5%)
THD+N	20Hz-20kHz, half power		≤0.1%
Intermodulation Distortion	60Hz: 7kHz, 4:1, half power		≤0.1%
Frequency Response		Po=1W RL=8Ω	0dB, +0.5dB, – 1dB f=20Hz-50kHz
Channel Separation	half power	RL=8Ω	≥70dB 1kHz
	Att.max	input 600Ω shunt
Residual noise Att. min		DIN AUDIO	≤70dB
S/N ratio		DIN AUDIO	104dB
Damping Factor	RL=8Ω	1KHz	≥350
Sensitivity @8Ω		Att.max	+8dB
Voltage Gain		Att.max	32.1dB
Input Impedance			30KΩ (balance) 15kΩ (unbalance)
Controls		Front Panel	POWER switch (push on/push off) attenuator (31position) x 2
		Rear Panel	MODE switch (STEREO/BRIDGE/PARALLEL) FILTER switch (SUB WOOFER/LOW CUT/OFF) x 2 FREQ.CONTROL (25Hz-150Hz) x 2 YAMAHA SPEAKER PROCESSING switch (ON/OFF )
Connectors		Input	XLR-3-31 type/ch 1/4" TRS/ch
		Output	SPEAKON, 5way biding post, 1/4" phone/ch
Indicators	POWER		x 1 (Green)
	PROTECTION		x 1 (Red)
	TEMP		x 1 (Red) heatsink temp ≥85oC
	YS PROCESSING		x 1 (Yellow)
	SIGNAL		x 2 (Green)
	CLIP		x 2 (Red)
Load Protection			POWER switch on/off mute DC-fault power supply shutdown (P7000S/5000S) DC-fault power output cut (P3500S/2500S)
Amplifier Protection			Thermal (heatsink temp≥90oC) VI limiter (RL=1Ω)
Limiter Circuit			comp. :THD≥0.5%
Cooling			Dual variable-speed fan / Single variable-speed fan
Power Requirements			USA/120V 60Hz
Idle Power Consumption			35W
1/8 Power Consumption (4Ω)			700W
Maximum Power Consumption (4Ω)			4000W
Dimensions (W x H x D)			18-7/8" x 3-7/16" x 17-15/16"
Weight			26.5 lbs
0dB=0.775V half power=1/2 output power

There are no reviews for this product.
Already own this product? Be the first to write a review!