The new Yamaha P5000S Power Amplifier delivers a robust amount of professional quality power and is designed to suit almost every need. In mono bridged mode, the P5000S delivers 2600 watts of clean, dependable power.

Those on a budget will find the newYamaha P5000S has more than enough power output and doesn't put a strain on even the most modest budget. Further savings are realized with extremely efficient operation using Yamaha's exclusive EEEngine technology which keeps operational costs down by significantly reducing AC power consumption and heat generation.

Look at the specifications and you'll notice that the P5000S is light in weight, which makes transport and setup less strenuous. What's even more amazing is the comparison in weight per watt delivered by the P5000S. The use of a switching power supply makes the P5000S very lightweight while maintaining superior audio quality.

The new Yamaha P5000S has an industrial design that delivers a refined and impressive look with deep blue faceplates bordered in silver trim, handles, and mounts. The chassis is specially designed to provide added durability and strength. Continuously variable-speed fans mounted internally on either side of the front panel offer quiet, efficient cooling.

Comprehensive protection consists of power on/off muting, DC detection, thermal protection, current limiting, and a protective cover for the attenuators is also supplied. If you need a dependable, professional amp that will work day after day, and night after night, you need the new Yamaha P5000S.

Model			P7000S	P5000S	P3500S	P2500S
Output Power
1kHz,  THD+N=1%		8Ω/STEREO	750W+750W	525W+525W	390W+390W	275W+275W
1kHz,  THD+N=1%		4Ω/STEREO	1100W+1100W	750W+750W	590W+590W	390W+390W
1kHz,  THD+N=1%		8Ω/BRIDGE	2000W	1500W	1180W	780W
20-20kHz,  THD+N=0.1%		8Ω/STEREO	700W+700W	500W+500W	350W+350W	250W+250W
20-20kHz, THD+N=0.1%		4Ω/STEREO	950W+950W	700W+700W	450W+450W	310W+310W
20-20kHz,  THD+N=0.1%		8Ω/BRIDGE	1900W	1400W	900W	620W
1KHz,  20mS nonclip		2Ω/STEREO	1600W+1600W	1300W+1300W	1000W+1000W	650W+650W
1KHz,  20mS nonclip		4Ω/BRIDGE	3200W	2600W	2000W	1300W
Power Bandwidth		halfpower	10Hz-40kHz (THD+N=0.5%)
THD+N	20Hz-20kHz, half power		≤0.1%
Intermodulation Distortion	60Hz: 7kHz, 4:1, half power		≤0.1%
Frequency Response		Po=1W RL=8Ω	0dB, +0.5dB, – 1dB f=20Hz-50kHz
Channel Separation	half power	RL=8Ω	≥70dB 1kHz
	Att.max	input 600Ω shunt
Residual noise Att. min		DIN AUDIO	≤70dB
S/N ratio		DIN AUDIO	104dB	103dB	102dB	100dB
Damping Factor	RL=8Ω	1KHz	≥350		≥200
Sensitivity @8Ω		Att.max	+8dB	+6dB	+4dB	+3dB
Voltage Gain		Att.max	32.1dB
Input Impedance			30KΩ (balance) 15kΩ (unbalance)
Controls		Front Panel	POWER switch (push on/push off) attenuator (31position) x 2
		Rear Panel	MODE switch (STEREO/BRIDGE/PARALLEL) FILTER switch (SUB WOOFER/LOW CUT/OFF) x 2 FREQ.CONTROL (25Hz-150Hz) x 2 YAMAHA SPEAKER PROCESSING switch (ON/OFF )
Connectors		Input	XLR-3-31 type/ch 1/4" TRS/ch
		Output	SPEAKON, 5way biding post, 1/4" phone/ch
Indicators	POWER		x 1 (Green)
	PROTECTION		x 1 (Red)
	TEMP		x 1 (Red) heatsink temp ≥85oC
	YS PROCESSING		x 1 (Yellow)
	SIGNAL		x 2 (Green)
	CLIP		x 2 (Red)
Load Protection			POWER switch on/off mute DC-fault power supply shutdown (P7000S/5000S) DC-fault power output cut (P3500S/2500S)
Amplifier Protection			Thermal (heatsink temp≥90oC) VI limiter (RL=1Ω)
Limiter Circuit			comp. :THD≥0.5%
Cooling			Dual variable-speed fan / Single variable-speed fan
Power Requirements			USA/120V 60Hz
Idle Power Consumption			35W	35W	30W	25W
1/8 Power Consumption (4Ω)			700W	550W	450W	320W
Maximum Power Consumption (4Ω)			4000W	3000W	2000W	1600W
Dimensions (W x H x D)			18-7/8" x 3-7/16" x 17-15/16"
Weight			26.5 lbs	26.5 lbs	33.1 lbs	30.9 lbs
0dB=0.775V half power=1/2 output power

There are no reviews for this product.
Already own this product? Be the first to write a review!