Those on a budget will find the newYamaha P3500S has more than enough power output and doesn't put a strain on even the most modest budget. Further savings are realized with extremely efficient operation using Yamaha's exclusive EEEngine technology which keeps operational costs down by significantly reducing AC power consumption and heat generation.

The new Yamaha P3500S Power Amplifier delivers a robust amount of professional quality power and is designed to suit most any need. In mono bridged mode, the P3500S delivers 2000 watts of clean, dependable power. Look at the specifications and you'll notice that the P3500S is light in weight, making transport and setup less strenuous.

The new Yamaha P3500S has an industrial design that delivers a refined and impressive look with deep blue faceplates bordered in silver trim, handles, and mounts. The chassis is specially designed to provide added durability and strength. Continuously variable-speed fans mounted internally on either side of the front panel offer quiet, efficient cooling.

Comprehensive protection consists of power on/off muting, DC detection, thermal protection, current limiting, and a protective cover for the attenuators is also supplied. If you need a dependable, professional amp that will work day after day, and night after night, you need the new Yamaha P3500S.

Model			P3500S
Output Power
1kHz,  THD+N=1%		8Ω/STEREO	390W+390W
1kHz,  THD+N=1%		4Ω/STEREO	590W+590W
1kHz,  THD+N=1%		8Ω/BRIDGE	1180W
20-20kHz,  THD+N=0.1%		8Ω/STEREO	350W+350W
20-20kHz, THD+N=0.1%		4Ω/STEREO	450W+450W
20-20kHz,  THD+N=0.1%		8Ω/BRIDGE	900W
1KHz,  20mS nonclip		2Ω/STEREO	1000W+1000W
1KHz,  20mS nonclip		4Ω/BRIDGE	2000W
Power Bandwidth		halfpower
THD+N	20Hz-20kHz, half power
Intermodulation Distortion	60Hz: 7kHz, 4:1, half power
Frequency Response		Po=1W RL=8Ω
Channel Separation	half power	RL=8Ω
	Att.max	input 600Ω shunt
Residual noise Att. min		DIN AUDIO
S/N ratio		DIN AUDIO	102dB
Damping Factor	RL=8Ω	1KHz	≥200
Sensitivity @8Ω		Att.max	+4dB
Voltage Gain		Att.max
Input Impedance
Controls		Front Panel
		Rear Panel
Connectors		Input
		Output
Indicators	POWER
	PROTECTION
	TEMP
	YS PROCESSING
	SIGNAL
	CLIP
Load Protection
Amplifier Protection
Limiter Circuit
Cooling
Power Requirements
Idle Power Consumption			30W
1/8 Power Consumption (4Ω)			450W
Maximum Power Consumption (4Ω)			2000W
Dimensions (W x H x D)
Weight			33.1 lbs
0dB=0.775V half power=1/2 output power

There are no reviews for this product.
Already own this product? Be the first to write a review!