 |
Description
|
|
|
|
|
|
The point of a powered mixer is power, right? That's why there are real FR Series High-Current amplifiers inside every Mackie PPM powered mixer. They crank out real wattage at any impedance, sound good even when pushed into clipping, and are legendary for their reliability.
Mackie also built in the industry's first 32-bit digital EMAC effects contained in a powered mixer. Developed specifically for PPM mixers, Mackie's EMAC is equivalent to many outboard effects processors, and offers 16 user-controllable, stunning effects. And since graphic equalizers are always in a powered mixer's output path, Mackie insanely over-engineered theirs with expensive, discrete components, eliminating the phase distortion that plagues our competitors.
IMMACULATE MIXING
Above all else, the Mackie PPM Series powered mixers sound great. Often copied, but seldom duplicated, their high-headroom, low-noise mic preamps are legendary the world over for their superior sound quality. That's why Mackie used them in the PPM Series—clean, quiet, superb. Each preamp channel has its own input Trim control, which provides up to 40dB microphone gain, 20dB line-level gain, or a full 20dB of attenuation to "pad" those really hot signals. Channels also feature level-set LEDs for easy visual input gain adjustment—just speak, sing, or yell into the mic and adjust the Trim control until the little green LED blinks. Time to dial in a little channel EQ...
NOT YOUR "GARDEN-VARIETY" POWERED MIXER
The Mackie PPM 406M powered mixer has everything you'll need for the gig. Each of the six mono channel strips feature XLR mic and 1/4" TRS line inputs, TRS insert jacks, monitor and effects send, 3-band EQ, and an input Trim control with individual level-set LEDs. And you wont need external effects, thanks to Mackie's EMAC 32-bit precision digital effects processor—which sounds great and is as easy to use as a stompbox. There's even an Effects to Monitor control, so you can give your stage monitors a "wet" mix, totally independent of the Mains. The output section boasts two 250-watt FR (Fast Recovery) power amps, dual 9-band graphic equalizers, 75Hz rumble reduction filters, a switchable soft-knee compressor, and output level metering.
ACTIVE 3-BAND EQUALIZATION
Speaking of "fuzzy-box" manufacturers, Mackie never limits your equalization options to bass and treble. All of the PPM Series mixers feature Mackie's world-famous 3-band EQs on each channel, with usable center frequencies as follows: 12kHz shelving high-frequency EQ (±15dB), 2.5kHz peaking mid-frequency EQ (±12dB), and 80Hz shelving low-frequency EQ (±15dB).
LOADED WITH EXTRA FEATURES...
The PPM's onboard phantom power supply means you can use high-quality condenser microphones, as well as your favorite dynamic mics. Outputs include a 1/4" TRS mixer line output, a 1/4" TRS monitor line output, and left and right RCA tape/line outputs. And because Mackie knows you don't want to give up an entire channel for a CD player, they've provided RCA Tape In jacks, with a dedicated level control, for your favorite external playback device (tape, CD, iPod, etc.).
Possibly the most important feature on the PPM Series mixers is its ingenious Break switch, which mutes channels 1-6, but allows whatever is connected to the Tape inputs to be heard. You'll be grateful Mackie included this switch when some rock-star wannabe jumps on stage during the break, and starts singing "Paradise by the Dashboard Light."
ONBOARD 32-BIT DIGITAL EFFECTS
One of the great features of Mackie's PPM Series powered mixers is the onboard EMAC™ 32-bit digital effects processor, which offers a plethora of dynamic digital effects. You can select any one of 16 custom-designed algorithms ranging from small room reverb to "out-of-this-world" phase shifting—and they're all controllable and easy to operate. Both the Monitor Master and Main Master rotary controls have corresponding EFX controls, so you can mix your effects into the monitors as well as the main outputs.
BUILT ROAD-RUGGED
All PPM mixers boast a rugged composite-molded case, which scoffs at the kind of abuse that would send those cheap "rat-fur-covered" wooden boxes crying for mama. Mackie has been building state-of-the-art mixers and power amplifiers since day one. So it was just a matter of time, you might even say it was inevitable, that they'd combine the two.
Now you can have it all, Mackie mixer, Mackie digital effects and Mackie power amps, all in one convenient package—the PPM Series.
|
|
|
|
|
|
- Mackie PPM 406M Powered Mixer Profile:
- Full-featured 6-channel 500-watt powered mixer with onboard EMAC 32-bit digital effects processor
- Two 250-watt FR Series High-Current power amps
- Power amps switchable as mono Mains or Mains + Monitor
- 6 mic/line channels with master phantom power
- 1/4" and XLR connectors on each input
- 1/4" Inserts on all 6 channels
- Two Aux Sends (MON and EFX)
|
- Active 3-band EQ on each channel
- 9-band, audiophile-quality graphic EQ on Main and Monitor outputs
- Ingenious "Break" Switch
- Compressors (switchable) on both outputs
- Rugged composite-molded case
- Dimensions: 11.7" H x 20.5" W x 13" D
- Approx. Shipping Weight: 41 lbs
|
|
|
|
|
|
Similar items viewed by other users:
Customer Reviews
Browse for more products in the same category as this item
|
|
Important accessories
for this product! |
|
|
|
