The Crate CA6110DG acoustic guitar amp has feedback elimination circuits that automatically eliminate feedback at two different frequencies. The CA6110DG acoustic guitar amp also has preamp circuits you can tailor for piezo or active systems or BOTH!!. It also has a special studio monitor style speaker with polypropylene cones and rubber surrounds in a ported cabinet for tight, even bass response.

The CA6110DG includes special features for live performance like XLR & 1/4" balanced line out with Level control which does not affect your stage volume. It also has a ground lift on the Line Out, Tweeter Level control, Effects Loop and a two button footswitch for Internal Reverb/Effects and Chorus switching.

The Crate CA6110DG has a high frequency component for crisp, clear highs, and includes a wide array of Reverbs, Delays, Chorus and Multiple Effects settings. This Crate acoustic amp is suited for instruments, vocals, or can even be used as a sound system in a small chapel or meeting room.

The delicate, clear tones of Crate's Acoustic series reflect instrument subtleties unlike any other acoustic amp on the market. With its unparalleled balance of clarity, power, natural tone, and intuitive controls, Crate acoustic guitar amps are widely endorsed by professional musicians. 

• Crate CA6110DG Features:
• Output Power Rating: 60 watts @ <1% THD
• Channels 1 & 2: Low: +/-15dB @ 80Hz
• Mid: +15, -30dBdB from 450Hz – 1.2kHz (Contour)
• High: +/-15dB @ 10kHz
• Input Impedance: 3.3M ohm High-Z, 3k ohm Low-Z
• Input Sensitivity: 5mV High-Z, 2mV Low-Z
• Sens. to Eff Send/Line out: 6mV High-Z, 3mV Low-Z
• Max Input Signal: 6V RMS (17V peak to peak)
• CD Input: Input Impedance: 22k ohm
• Input Sensitivity: 150mV
• Max Input Signal: 6V RMS (17V peak to peak)
• Aux Eff. Return: Input Impedance: 11k ohm
• Input Sensitivity: 60mV RMS
• Max Input Signal: 6V RMS (17V peak to peak)
• Eff Send Out. Impedance: 2.2k ohm
• Line Out Out. Impedance: 220 ohm Low-Z, 2.2k ohm High-Z
• Feedback Filters: 10Hz to 4.8kHz range, -15dB cut per filter
• Internal Woofer: 10” w/polypropylene cone, rubber surround, 30.5oz magnet, 1.5” voice coil,
• 8 ohms, 75w RMS, 95dB 1w 1m
• Internal Tweeter: High efficiency Piezo, 110dB 1w 1m
• Internal Crossover: Passive type
• Power Requirements: 120VAC, 60Hz, 70VA
• 100/115VAC, 50/60Hz, 70VA
• 230VAC, 50/60Hz, 70VA
• Size and Weight: 17”H x 16”W x 14”D, 37 lbs.